Surface Bright Finish Material Stainless Steel 304 Type in Spool Thin Stainless Steel Wire
Product Information
Stainless steel wire, also known as stainless steel wire, is made of stainless steel as raw material for various kinds of silk products of different specifications and models. The cross section is generally round or flat. The common stainless steel wires with good corrosion resistance and high cost performance are 201, 304 and 316 stainless steel wires.
Specifications
| Name | Code | Characteristics | Specification | Material |
| Stainless steel soft wire / Hydrogen wire | S, soft | Bright surface, soft, no magnetism, fatigue resistance, large extension force and other characteristics | 0.09 — 0.45mm | 201, 304, 304L, 316, 316L, 310, 310S, 321, etc. |
| Stainless steel light cable | LD, lightly drawn | After heat treatment, the steel wire shall be pulled with small reduction surface. The surface is bright, soft, fatigue resistant, and has certain elongation. | 0.5 — 1.5mm | 201, 304, 304L, 316, 316L, etc. |
| Stainless steel cold cable | WCD, cold drawn | The surface is smooth, toughness is good and wear resistant | 0.03 — 6.0mm | 201, 304, 304L, 316, 316L, etc. |
| Stainless steel spring wire | - | High hardness, strong elasticity, good wear resistance and compression resistance | 0.15 — 5.0mm | 302, 304H, 304L, 316, 316L, 310, 310S, 321, etc. |
Material composition table
| AISI Material | Chemical composition (%) |
| | C | Si | Mn | P | S | Ni | Cr | Mo | Cu | Ti |
| 201 | ≤0.15 | ≤0.75 | 5.5~7.5 | ≤0.06 | ≤0.03 | 3.5~5.5 | 16~18 | - | - | - |
| 304 | <0.08 | <1.0 | <2.0 | <0.035 | <0.03 | 8~10 | 17~19 | - | - | - |
| 304L | <0.03 | <1.0 | <2.0 | <0.04 | <0.03 | 9~13 | 18~20 | - | - | - |
| 304HC | <0.06 | <1.0 | 1.2-1.8 | <0.035 | <0.03 | 8~11 | 17~19 | - | 2.0-3.0 | - |
| 316 | <0.08 | <1.0 | <2.0 | <0.04 | <0.03 | 10~14 | 16~18 | 2.0~3.0 | - | - |
| 316L | <0.03 | <1.0 | <2.0 | <0.04 | <0.03 | 12~15 | 16~18 | 2.0~3.0 | - | - |
| 310S | <0.08 | <1.5 | <2.0 | <0.04 | <0.03 | 19~22 | 24~26 | - | - | - |
| 321 | <0.08 | <1.0 | <2.0 | <0.045 | <0.03 | 9~13 | 17~19 | - | - | >0.035 |
| 301 | <0.15 | <1.0 | <2.0 | <0.04 | <0.03 | >7 | 16~18 | - | - | - |
| 302 | <0.15 | <1.0 | <2.0 | <0.04 | <0.03 | >8 | 17~19 | - | - | - |
| | | | | | | | | | | |
Advantage
1. It has strong heat resistance.
316 stainless steel no matter it is used intermittently at 1600 ℃ or continuously at 1700 ℃, there will not be any change, let alone melting, which has obvious advantages compared with copper and aluminum. Because of such advantages, it is widely used in the metallurgical industry and has made great contribution to the industry.
2. It has corrosion resistance.
Because his raw material is stainless steel, and stainless steel contains carbon, manganese, nickel and other elements, after the reaction in the air, it will form a protective film, which can reduce the impact of the outside world on stainless steel. Stainless steel is not easy to react with acid and alkali, and has good corrosion resistance, so it will be found that stainless steel wire plays a very extensive role in the paper industry and deep-sea operators.
3. It has strong plasticity.
This property can make it into various shapes under the condition of external force. This is a rare decorative material for designers, because of its low hardness, it can be changed into various shapes according to the demand, so as to achieve the purpose of decoration, with a strong decorative effect. It is precisely because it has obvious advantages compared with iron, aluminum, copper, etc., so now people use it much more.
Product Tags:
|
|
Bright Finish Thin Metal Wire 304 Thin Stainless Steel Wire In Spool Images
|
